Responsive Image Banner

Enerpac launches lifter for small spaces

Premium Content
Enerpac’s ML40 Mini Lift hydraulic telescopic lifting gantry new in July 2021 Enerpac’s ML40 Mini Lift hydraulic telescopic lifting gantry new in July 2021

The 40 tonne capacity (on four legs) ML40 Mini Lift hydraulic telescopic gantry lifting system is new from Enerpac. It is designed to help install machinery and equipment in the often restricted space of a factory or other industrial plant.

Portability was a key design requirement as was simple set up, and ease of use. Typical customers will be machinery movers, plant relocation services and medical equipment installers, The manufacturer said.

Compact dimensions were also vital, allowing the ML40 to be used to move equipment around old installations. Its collapsed height is 1.97 metres and it is just 750 mm wide. Most freight elevators should accommodate it, Enerpac said. Its extended height is 5.5 metres and each leg weight 1,350 kg, including its hydraulic oil.

Portability is a key feature of the ML40 leg unit Portability is a key feature of the ML40 leg unit

Another feature is its ability to up-end a load to help its passage through a building. Its low headroom requirement helps when unloading from a truck indoors and when assembling something tall under a roof. Machinery can be assembled from smaller components and when complete the ML40 can also move that into position.

Its synchronised lifting function is a help when moving and installing delicate loads, for example, medical equipment in hospitals.

Power is from a standard single phase 115 or 230 V AC supply. Control is via a wireless pendant to keep the operator away from equipment during operation. It runs on a standard 610 mm (2 foot) gauge track but can also be used without, depending on floor and ground conditions.

The hand-held controller for the Enerpac ML40 Mini Lift gantry The hand-held controller for the Enerpac ML40 Mini Lift gantry
STAY CONNECTED

Receive the information you need when you need it through our world-leading magazines, newsletters and daily briefings.

Sign up

Latest News
Arrowhead Winch hosts first Authorized Service Center Advisory Council
Arrowhead Winch hosted its first Advisory Council meeting, bringing together 28 representatives from Authorized Service Centers to collaborate on offshore crane service standards. 
Berard Transportation marks 80 years with investment in next-gen fleet
Berard has expanded its fleet with 28 lines of TII-Scheuerle SPMT-ES trailers and two Z390 PPUs from Rigging Gear Sales. 
Bridge installations working together in Hamburg
Teamwork made the bridge installation dream work and in much less time too
CONNECT WITH THE TEAM
D.Ann Shiffler Editor, American Cranes & Transport Tel: +1 512 869 8838 E-mail: [email protected]
Alex Dahm Editorial Manager Tel: +44 (0) 1892 786206 E-mail: [email protected]
Matt Burk VP Sales Tel: +1 773 610 9467 E-mail: [email protected]
Simon Battersby Sales Manager Tel: +44 (0) 1892 786223 E-mail: [email protected]
CONNECT WITH SOCIAL MEDIA

Your VIP Pass to the World Cranes & Transport Summit

Dublin | Nov 18–19
Cap off the Summit with an exclusive Super-Premium Irish Whiskey Tasting at the historic Swan Bar.
🥃 Network with industry leaders in an intimate setting
🌍 Gain world-class insights at the conference
🍀 Experience the culture of old Dublin

I'M INTERESTED