Hydraulic luffer concept new from Potain

Premium Content

23 November 2016

Tower crane manufacturer Potain showed a new hydraulic luffing jib crane concept at the Bauma China exhibition in Shanghai.
The MCH 120 is a design collaboration between the French and Chinese engineering departments of Manitowoc's Potain division. The 120 tonne-metre rated crane is a flat top luffer with short counter jib and the possibility of a steep out of service position for use on congested sites. In addition, the concept is designed to offer faster and easier erection from a compact package.
A requirement for the design was to have the same performance and quick luffing as a rope luffing type and to save time in cost and operation. To do this needs a powerful hydraulic pump and smart hydraulic control. This new mechanism is named VVH.
It will lift 8 tonnes on four falls of rope and 2 tonnes at the maximum 50 metre radius. The counter jib is 7 m and the out of service radius is 13.5 m with the jib angle around 88 degrees. Mast sections are the same 1.6 m L48 type as for the MCR 160 and MCT 205 models or a 2 m mast can be used.
Target markets include Vietnam, Thailand and Philippines. More models in capacities either side of this one are likely to follow according to demand.

Latest News
Gearmatic adds GM18 and GM50 hydraulic planetary winches
Two new winch models from USA-based manufacturer
MEC starts shipping first carry deck crane in North America
Company reports first shipment for new pick and carry crane
Franc Jost 1938 to 2026
Saying goodbye to a prolific, long-serving and well-known tower crane designer
CONNECT WITH THE TEAM
D.Ann Shiffler Editor, American Cranes & Transport Tel: +1 512 869 8838 E-mail: [email protected]
Alex Dahm Editorial Manager Tel: +44 (0) 1892 786206 E-mail: [email protected]
Mitchell Keller Managing Editor Tel: +1 (262) 483-3726 E-mail: [email protected]
Simon Battersby Sales Manager Tel: +44 (0) 1892 786223 E-mail: [email protected]
CONNECT WITH SOCIAL MEDIA