Linden Comansa on multi million Euro build

Premium Content

17 November 2014

The 18 tonne capacity 21LC290 on site

The 18 tonne capacity 21LC290 on site

Copper producer Aurubis Group has put a Linden Comansa 21LC290 tower crane to work at a sulphuric acid plant near Pirdop in Bulgaria.

The 21LC290 was delivered and installed by Bulgarian dealer Bulgarcom. The facility is part of the Aurubis Group €44.2 million (US$ 55.1 million) Aurubis Bulgaria 2014 project, which aims to protect the environment and increase productivity, a spokesperson said.

The 18 tonne capacity 21LC290 will be used to build two chimneys. It has been configured with a freestanding height of 63.1 metres and 40 m jib.

The first chimney was 125 m tall. For the lift, the steel structure of the chimney was assembled on the ground into modules weighing 14 tonnes. The sections were then lifted into position.

As the job progressed, the tower crane was tied to the steel structure with a bracing at a height of 49 m, a spokesperson explained. A Linden Comansa J2-10 cage was used to climb the crane to a height of 101.6 m. At a later stage of the project, another tie-frame was added at the height of 88 m, bringing the crane's final height under hook to 134.6 m.

Due to the site's location next to the Balkan mountain, the team had to deal with changing weather conditions during the installation of the crane. Tenko Tenev, chief technician at main contractor Metalik, said, “We had many thunderstorms and the constant changes of the wind were a big challenge for all of us.”

Nikolay Nikolov, Bulgarcom managing director, said, “The construction of the chimney was very fast, partly because of Linden Comansa’s Effi-Plus system. The standard 50 kW hoist winch works at a high speed, up to 150 metres a minute, which allowed us to accomplish a very efficient job, especially during the hoist down procedures.”

For the second stage of the project, the crane was disassembled and erected at another part of the plant to build the second chimney. To install the 120 m high chimney the crane has been configured with 40 m jib at a height of 101.6 m. Final height under hook will be 123.6 m.

Latest News
Gearmatic adds GM18 and GM50 hydraulic planetary winches
Two new winch models from USA-based manufacturer
MEC starts shipping first carry deck crane in North America
Company reports first shipment for new pick and carry crane
Franc Jost 1938 to 2026
Saying goodbye to a prolific, long-serving and well-known tower crane designer
CONNECT WITH THE TEAM
D.Ann Shiffler Editor, American Cranes & Transport Tel: +1 512 869 8838 E-mail: [email protected]
Alex Dahm Editorial Manager Tel: +44 (0) 1892 786206 E-mail: [email protected]
Mitchell Keller Managing Editor Tel: +1 (262) 483-3726 E-mail: [email protected]
Simon Battersby Sales Manager Tel: +44 (0) 1892 786223 E-mail: [email protected]
CONNECT WITH SOCIAL MEDIA