Saudi road transfer

Premium Content

07 September 2010

Almajdouie Heavylift and Engineering (MHL) took the challenging task of installing a 266 tonne transformer at a project site on the outskirts of Jeddah, Saudi Arabia.

The company offloaded the 266 tonne, 10.68 x 3.90 x 5.05 m (L/W/H) transformer from a heavy lift ship and loaded it onto Almajdouie's conventional trailers in Jeddah Port.

A 10-axle side-by-side conventional trailer was used to transport the transformer about 130 km from Jeddah Port to the Shoaiba Sceco project site. The transformer was then offloaded and installed, using jacking and skidding equipment, in seven days.

Strong winds made the operation difficult at Jeddah Port, says the company, so the MHL team used a lever block to hold the cargo before loading it onto the trailers.

Transport height was another challenge as it could hit signboards along the way. The team solved this by moving the cargo very early in the morning to avoid heavy traffic, making it easier to skirt around the boards. Cars parked on the street in urban areas were also moved to make way for the wide transport.

Latest News
Gearmatic adds GM18 and GM50 hydraulic planetary winches
Two new winch models from USA-based manufacturer
MEC starts shipping first carry deck crane in North America
Company reports first shipment for new pick and carry crane
Franc Jost 1938 to 2026
Saying goodbye to a prolific, long-serving and well-known tower crane designer
CONNECT WITH THE TEAM
D.Ann Shiffler Editor, American Cranes & Transport Tel: +1 512 869 8838 E-mail: [email protected]
Alex Dahm Editorial Manager Tel: +44 (0) 1892 786206 E-mail: [email protected]
Mitchell Keller Managing Editor Tel: +1 (262) 483-3726 E-mail: [email protected]
Simon Battersby Sales Manager Tel: +44 (0) 1892 786223 E-mail: [email protected]
CONNECT WITH SOCIAL MEDIA