Sleipnir’s first decom job

Premium Content

20 May 2020

Heerema Marine Contractors has completed the first oil platform decommissioning project with its Sleipnir offshore lifting vessel.

Aerial view of Heerema Marine Contractors decommissioning the platform with Sleipnir heavy lift vessel

Heerema Marine Contractors installed and decommissioned the platform

Until now the world’s largest offshore lifting vessel has been used for installation work. Towards the end of its first year in operation the 20,000 tonne capacity SSCV Sleipnir has now completed the decommissioning of the Ekofisk 2/4A platform from the Greater Ekofisk Field in the North Sea off the coast of Norway.

It was the completion of a circle in that Heerema used its Champion vessel to install the same modules for ConocoPhillips in the Greater Ekofisk Field in the 1970s. Almost fifty years later Sleipnir completed the journey with the decommissioning.

The permanent production platform was the oldest on the Norwegian shelf when oil production ended in 2013. Up to 99 per cent of the platform will be recycled at the AFEBV decommissioning site in Vats, Norway.

Sleipnir performing a load out on the Ekofisk decommissioning project

Sleipnir performing a load out on the Ekofisk decommissioning project

Heerema was responsible for engineering, preparation, removal, disposal and recycling of five modules, a crane boom, and a burner boom from the Greater Ekofisk Field. It has also developed a subsea excavator to prepare the jacket for removal later this year, also using Sleipnir.

SembCorp Marine in Singapore finished building the 20,000 tonne capacity SSCV Sleipnir for Heerema Marine Contractors in 2019. The world record-breaking crane ship had been christened by June and was on its way. It is 220 metres long by 102 metres wide and carries a pair of turret cranes each rated to lift 10,000 tonnes, which can work in tandem or individually.

Almost 50 years separated Heerema's work on this ConocoPhillips platform

Almost 50 years separated Heerema’s work on this ConocoPhillips platform

csm_84c3f681-22d0-4ba5-89c7-a3354df95458_c80cbe36cc

csm_84c3f681-22d0-4ba5-89c7-a3354df95458_c80cbe36cc

Sleipnir's two cranes can each lift 10,000 tonnes

Sleipnir’s two cranes can each lift 10,000 tonnes

Latest News
Gearmatic adds GM18 and GM50 hydraulic planetary winches
Two new winch models from USA-based manufacturer
MEC starts shipping first carry deck crane in North America
Company reports first shipment for new pick and carry crane
Franc Jost 1938 to 2026
Saying goodbye to a prolific, long-serving and well-known tower crane designer
CONNECT WITH THE TEAM
D.Ann Shiffler Editor, American Cranes & Transport Tel: +1 512 869 8838 E-mail: [email protected]
Alex Dahm Editorial Manager Tel: +44 (0) 1892 786206 E-mail: [email protected]
Mitchell Keller Managing Editor Tel: +1 (262) 483-3726 E-mail: [email protected]
Simon Battersby Sales Manager Tel: +44 (0) 1892 786223 E-mail: [email protected]
CONNECT WITH SOCIAL MEDIA