Fanger buys largest crawler in Switzerland

Premium Content

06 October 2016

Liebherr's LR-1750-2 is working for Fanger in Switzerland

Liebherr's LR-1750-2 is working for Fanger in Switzerland

With its purchase of a new 750 tonne class crawler crane from Liebherr, Fanger Kran AG opened a new chapter in the history of lifting equipment stationed in Switzerland.

The first job awaiting the Liebherr LR 1750/2 lattice boom crawler crane was a demanding one near Lucerne. The crane had to handle a gross load of around 270 tonnes to replace a 30 metre cylinder. In a constricted space in the production plant of a manufacturer of wooden materials, the job was only possible by moving the crane while it held the load.

The Fanger team, led by project manager Josef Waser, was confronted with a tricky task for the crane‘s first job. An enormous cylinder in the production plant had to be replaced in difficult conditions and under time pressure.

Production had to be stopped for the duration of the work so, for the customer, it was extremely important to have the job completed quickly and smoothly. This was also the reason that crane driver Tony Burch had a service technician from Liebherr available for assembling the new crane and throughout the completion of the job.

The crane was fitted with 575 tonnes of ballast both for this job and for the installation of the new component two days later. The suspended ballast on the derrick boom alone weighed 360 tonnes, which is close to maximum.

Over the next few years, the main area for use of the crane in its silver-grey livery will be hoisting work for bridge construction projects.

Since the end of 2015, Liebherr has been marketing an improved version of its LR 1750. The most obvious change is the significantly extended derrick boom which now measures 38 m. The larger pivot section on the LR 1750/2 achieves lifting capacity increases of up to 30 percent in some set-up configurations when operating the main boom, Liebherr said.

Latest News
Why does crane capacity alone not confirm a safe and workable lift?
A long list of factors must be checked, extending way beyond nominal lifting capacity
First Liebherr LTM 1150-5.4 mobile crane delivered in the UK
New addition will operate across London and the south of England
Tadano crane reaches ‘record’ 199m hub height in Germany
German job leans on Tadano crawler for “record” height
CONNECT WITH THE TEAM
D.Ann Shiffler Editor, American Cranes & Transport Tel: +1 512 869 8838 E-mail: [email protected]
Alex Dahm Editorial Manager Tel: +44 (0) 1892 786206 E-mail: [email protected]
Mitchell Keller Managing Editor Tel: +1 (262) 483-3726 E-mail: [email protected]
Simon Battersby Sales Manager Tel: +44 (0) 1892 786223 E-mail: [email protected]
CONNECT WITH SOCIAL MEDIA